Vimba X Cognex Adapter - Release Notes

  Version: 2.0.1 
  Date:    February 2026
=============================================

Supported cameras
-----------------
All Allied Vision cameras that are supported by Vimba X can be used with Vimba X Cognex Adapter.

Tested with Alvium G1, Alvium G5, Alvium USB, Goldeye Pro and allPIXA neo 10GigE cameras.
Tested Cognex VisionPro version: VisionPro 9.25 (R)
Tested operating systems: Windows 10, Windows 11


Prerequisites and Installation
------------------------------
- Install Vimba X before installing Vimba X Cognex Adapter. 
- GigE Vision cameras: Deactivate Vision Pro's eBus drivers if installed.
- For detailed instructions, getting started with QuickBuild and troubleshooting, see the User Guide:
  https://www.alliedvision.com/en/support/software-downloads/other-software/tools-adapters-drivers
  
Limitations
-----------
- Manual trigger mode: The camera must support Software trigger. 
- Feature values: 
    Invalid values are not rounded to the next possible value. 
    If an invalid value is not applied, this is not always shown. 

See chapter Troubleshooting in the User Guide for more details.

-------------
Version 2.0.1
-------------
- Added allPIXA neo 10GigE camera support
- Changed behavior: Camera settings are retained when opening the camera.

-------------
Version 2.0.0
-------------
- First release